Select Page

China Custom Casting Small Diameter Stainless Steel Spline Shaft manufacturer

Item Description

 General Items      
 Application/Provider Area

Metal Elements Answer for Vehicle, Agriculture device, Design Equipment, transportation products, Valve and Pump system, Agriculture equipment metallic Parts, motor bracket, truck chassis bracket, gear box , equipment housing , equipment cover, shaft, spline shaft , pulley, flange, connection pipe, pipe, hydraulic valve , valve housing ,Fitting , flange, wheel, fly wheel, oil pump housing, starter housing, coolant pump housing, transmission shaft , transmission equipment, sprocket, chains etc.
 Main blank Procedure for Metal  Casting  
Investment  casting (wax mould created by middle temperature wax) /Precision  casting
Dropped Wax Casting (wax mold created by minimal temperature wax)/ Precision  casting
 
 Blanks Tolerance -Casting  Tolerance CT7-8 for Lost wax Casting Approach
CT4-6 for Expense casting Procedure
 Applicable Content Carbon metal, Minimal Carbon steel, middle carbon metal, G35, G45, WCB, WCA, WCC,  ISO 340-550, 
 
Alloy Carbon steel: G25CrMo4, Heat Resistant Steel,
 
Stainless Metal:  CF8,  CF8M, . G-X6CrNiMo1810, G-X7CrNiNb1189, SUS 304, 304L, 316, 316L.
OR In accordance to customer prerequisite
 
 
Copper alloy
Brass: HPb59-1, CuZn39Pb1/2/3, CuZn40, C36000, C37710, C67400, and so on.
Aluminum Bronze: QAl11-6-6, CuAl10Fe2/3, CuAl10Ni5Fe5, C65500, C95600, C87500
Sn Bronze: CuPb5Sn5Zn5, C83600, C84400, C86500. and so forth.
Magnesium
 Casting Blank Size  /Proportions 2 mm-600mm / .08inch-24inch  according to consumer need
 Casting Blank Weight Range from .01kg-85kg
 Applicable Machining Procedure  
CNC Machining/ Lathing/ Milling/ Turning/ Dull/ Drilling/ Tapping/ Broaching/Reaming /Grinding/Honing and  etc.
 
 Machining Tolerance From .005mm-.01mm-.1mm
 Machined Floor Quality Ra .8-Ra3.2 according to customer necessity
 Applicable Warmth Remedy  
Normalization , annealing, quenching and tempering, Scenario Hardening, Nitriding, Carbon Nitriding, Induction Quenching
 
 Applicable Finish Surface  Treatment Shot/sand blast, polishing, Surface passivation, Primer Painting , Powder coating, ED- Coating, Chromate Plating, zinc-plate, Dacromat coating, Complete Painting,
 MOQ For metal casting: 200pcs
For machining: 50pcs
 Lead Time 45days from the receipt day of deposit  for Customized Casting Small Diameter Stainless Steel Spline Shaft

 

Our Organization

                       ZheJiang CZPT Machinery Manufacture Co., Ltd.
                                                                                                   –Department of CZPT Ltd. 

We specialize in Metal Components Resolution for Car, Agriculture equipment, Building Device, transportation tools, Valve and Pump program. 

With maintaining production approach design, high quality plHangZhou, crucial production processes and final quality manage in house.
 We are mastering important competence to offer quality mechanical areas and assembly to our consumers for the two Chinese and Export Market place.

To satisfy distinct mechanical and practical specifications from our customers we are generating a big range of metallic merchandise for our clientele on foundation of various blanks remedies and systems.
These blanks options and systems contain processes of Iron Casting, Metal Casting, Stainless Steel Casting, Aluminum Casting and Forging. 

For the duration of the early involvement of the customer’s style method we are supplying professional input to our clients in terms of procedure feasibility, price reduction and perform strategy
                You are welcome to contact us for technological enquiry and organization cooperation.

FAQ:

1. Are you a producer or a trading company?
We are a specialist maker with more than 15 years’ export encounter for designing and making vehicle equipment components.

two. How can I get some samples?
If you need, we are glad to offer you you samples for free, but the new clients are envisioned to shell out the courier value,
and the charge will be deducted from the payment for formal purchase.

3. Can you make casting in accordance to our drawing?
Of course, we can make casting according to your drawing, Second drawing, or 3D cad product. If the 3D cad model can be provided,
the development of the tooling can be much more effective. But without 3D, based on 2d drawing we can nevertheless make the samples appropriately approved.

4. Can you make casting primarily based on our samples?
Yes, we can make measurement based mostly on your samples to make drawings for tooling generating.

five. What is your top quality management unit in residence?
We have spectrometer in home to monitor the chemical property, tensile test machine to handle the mechanical house and UT Sonic as NDT examining strategy to management the casting detect under the floor of casting

US $1-6
/ kg
|
1 kg

(Min. Order)

###

Die Casting Machine Type: Hot Chamber Die Casting Machine
Die Casting Method: Precision Die Casting
Application: Auto Parts
Machining: CNC Machining
Material: Stainless Steel
Surface Preparation: Dacromat Coating, Finish Painting

###

Samples:
US$ 4.59/kg
1 kg(Min.Order)

|
Request Sample

###

Customization:

###

 General Products      
 Application/Service Area

Metal Parts Solution for Vehicle, Agriculture machine, Construction Machine, transportation equipment, Valve and Pump system, Agriculture machine metal Parts, engine bracket, truck chassis bracket, gear box , gear housing , gear cover, shaft, spline shaft , pulley, flange, connection pipe, pipe, hydraulic valve , valve housing ,Fitting , flange, wheel, fly wheel, oil pump housing, starter housing, coolant pump housing, transmission shaft , transmission gear, sprocket, chains etc.
 Main blank Process for Steel  Casting  
Investment  casting (wax mold made by middle temperature wax) /Precision  casting ;
Lost Wax Casting (wax mold made by low temperature wax)/ Precision  casting;
 
 Blanks Tolerance -Casting  Tolerance CT7-8 for Lost wax Casting Process
CT4-6 for Investment casting Process
 Applicable Material Carbon steel, Low Carbon steel, middle carbon steel, G35, G45, WCB, WCA, WCC,  ISO 340-550, 
 
Alloy Carbon steel: G25CrMo4, Heat Resistant Steel,
 
Stainless Steel:  CF8,  CF8M, . G-X6CrNiMo1810, G-X7CrNiNb1189, SUS 304, 304L, 316, 316L.
OR According to customer requirement
 
 
Copper alloy
Brass: HPb59-1, CuZn39Pb1/2/3, CuZn40, C36000, C37710, C67400, etc.
Aluminum Bronze: QAl11-6-6, CuAl10Fe2/3, CuAl10Ni5Fe5, C65500, C95600, C87500
Sn Bronze: CuPb5Sn5Zn5, C83600, C84400, C86500. etc.
Magnesium
 Casting Blank Size  /Dimensions 2 mm-600mm / 0.08inch-24inch  according to customer requirement
 Casting Blank Weight Range from 0.01kg-85kg
 Applicable Machining Process  
CNC Machining/ Lathing/ Milling/ Turning/ Boring/ Drilling/ Tapping/ Broaching/Reaming /Grinding/Honing and  etc.
 
 Machining Tolerance From 0.005mm-0.01mm-0.1mm
 Machined Surface Quality Ra 0.8-Ra3.2 according to customer requirement
 Applicable Heat Treatment  
Normalization , annealing, quenching and tempering, Case Hardening, Nitriding, Carbon Nitriding, Induction Quenching
 
 Applicable Finish Surface  Treatment Shot/sand blast, polishing, Surface passivation, Primer Painting , Powder coating, ED- Coating, Chromate Plating, zinc-plate, Dacromat coating, Finish Painting,
 MOQ For steel casting: 200pcs
For machining: 50pcs
 Lead Time 45days from the receipt date of deposit  for Custom Casting Small Diameter Stainless Steel Spline Shaft
US $1-6
/ kg
|
1 kg

(Min. Order)

###

Die Casting Machine Type: Hot Chamber Die Casting Machine
Die Casting Method: Precision Die Casting
Application: Auto Parts
Machining: CNC Machining
Material: Stainless Steel
Surface Preparation: Dacromat Coating, Finish Painting

###

Samples:
US$ 4.59/kg
1 kg(Min.Order)

|
Request Sample

###

Customization:

###

 General Products      
 Application/Service Area

Metal Parts Solution for Vehicle, Agriculture machine, Construction Machine, transportation equipment, Valve and Pump system, Agriculture machine metal Parts, engine bracket, truck chassis bracket, gear box , gear housing , gear cover, shaft, spline shaft , pulley, flange, connection pipe, pipe, hydraulic valve , valve housing ,Fitting , flange, wheel, fly wheel, oil pump housing, starter housing, coolant pump housing, transmission shaft , transmission gear, sprocket, chains etc.
 Main blank Process for Steel  Casting  
Investment  casting (wax mold made by middle temperature wax) /Precision  casting ;
Lost Wax Casting (wax mold made by low temperature wax)/ Precision  casting;
 
 Blanks Tolerance -Casting  Tolerance CT7-8 for Lost wax Casting Process
CT4-6 for Investment casting Process
 Applicable Material Carbon steel, Low Carbon steel, middle carbon steel, G35, G45, WCB, WCA, WCC,  ISO 340-550, 
 
Alloy Carbon steel: G25CrMo4, Heat Resistant Steel,
 
Stainless Steel:  CF8,  CF8M, . G-X6CrNiMo1810, G-X7CrNiNb1189, SUS 304, 304L, 316, 316L.
OR According to customer requirement
 
 
Copper alloy
Brass: HPb59-1, CuZn39Pb1/2/3, CuZn40, C36000, C37710, C67400, etc.
Aluminum Bronze: QAl11-6-6, CuAl10Fe2/3, CuAl10Ni5Fe5, C65500, C95600, C87500
Sn Bronze: CuPb5Sn5Zn5, C83600, C84400, C86500. etc.
Magnesium
 Casting Blank Size  /Dimensions 2 mm-600mm / 0.08inch-24inch  according to customer requirement
 Casting Blank Weight Range from 0.01kg-85kg
 Applicable Machining Process  
CNC Machining/ Lathing/ Milling/ Turning/ Boring/ Drilling/ Tapping/ Broaching/Reaming /Grinding/Honing and  etc.
 
 Machining Tolerance From 0.005mm-0.01mm-0.1mm
 Machined Surface Quality Ra 0.8-Ra3.2 according to customer requirement
 Applicable Heat Treatment  
Normalization , annealing, quenching and tempering, Case Hardening, Nitriding, Carbon Nitriding, Induction Quenching
 
 Applicable Finish Surface  Treatment Shot/sand blast, polishing, Surface passivation, Primer Painting , Powder coating, ED- Coating, Chromate Plating, zinc-plate, Dacromat coating, Finish Painting,
 MOQ For steel casting: 200pcs
For machining: 50pcs
 Lead Time 45days from the receipt date of deposit  for Custom Casting Small Diameter Stainless Steel Spline Shaft

Standard Length Splined Shafts

Standard Length Splined Shafts are made from Mild Steel and are perfect for most repair jobs, custom machinery building, and many other applications. All stock splined shafts are 2-3/4 inches in length, and full splines are available in any length, with additional materials and working lengths available upon request and quotation. CZPT Manufacturing Company is proud to offer these standard length shafts.
splineshaft

Disc brake mounting interfaces that are splined

There are two common disc brake mounting interfaces, splined and center lock. Disc brakes with splined interfaces are more common. They are usually easier to install. The center lock system requires a tool to remove the locking ring on the disc hub. Six-bolt rotors are easier to install and require only six bolts. The center lock system is commonly used with performance road bikes.
Post mount disc brakes require a post mount adapter, while flat mount disc brakes do not. Post mount adapters are more common and are used for carbon mountain bikes, while flat mount interfaces are becoming the norm on road and gravel bikes. All disc brake adapters are adjustable for rotor size, though. Road bikes usually use 160mm rotors while mountain bikes use rotors that are 180mm or 200mm.
splineshaft

Disc brake mounting interfaces that are helical splined

A helical splined disc brake mounting interface is designed with a splined connection between the hub and brake disc. This splined connection allows for a relatively large amount of radial and rotational displacement between the disc and hub. A loosely splined interface can cause a rattling noise due to the movement of the disc in relation to the hub.
The splines on the brake disc and hub are connected via an air gap. The air gap helps reduce heat conduction from the brake disc to the hub. The present invention addresses problems of noise, heat, and retraction of brake discs at the release of the brake. It also addresses issues with skewing and dragging. If you’re unsure whether this type of mounting interface is right for you, consult your mechanic.
Disc brake mounting interfaces that are helix-splined may be used in conjunction with other components of a wheel. They are particularly useful in disc brake mounting interfaces for hub-to-hub assemblies. The spacer elements, which are preferably located circumferentially, provide substantially the same function no matter how the brake disc rotates. Preferably, three spacer elements are located around the brake disc. Each of these spacer elements has equal clearance between the splines of the brake disc and the hub.
Spacer elements 6 include a helical spring portion 6.1 and extensions in tangential directions that terminate in hooks 6.4. These hooks abut against the brake disc 1 in both directions. The helical spring portion 5.1 and 6.1 have stiffness enough to absorb radial impacts. The spacer elements are arranged around the circumference of the intermeshing zone.
A helical splined disc mount includes a stabilizing element formed as a helical spring. The helical spring extends to the disc’s splines and teeth. The ends of the extension extend in opposite directions, while brackets at each end engage with the disc’s splines and teeth. This stabilizing element is positioned axially over the disc’s width.
Helical splined disc brake mounting interfaces are popular in bicycles and road bicycles. They’re a reliable, durable way to mount your brakes. Splines are widely used in aerospace, and have a higher fatigue life and reliability. The interfaces between the splined disc brake and BB spindle are made from aluminum and acetate.
As the splined hub mounts the disc in a helical fashion, the spring wire and disc 2 will be positioned in close contact. As the spring wire contacts the disc, it creates friction forces that are evenly distributed throughout the disc. This allows for a wide range of axial motion. Disc brake mounting interfaces that are helical splined have higher strength and stiffness than their counterparts.
Disc brake mounting interfaces that are helically splined can have a wide range of splined surfaces. The splined surfaces are the most common type of disc brake mounting interfaces. They are typically made of stainless steel or aluminum and can be used for a variety of applications. However, a splined disc mount will not support a disc with an oversized brake caliper.

China Custom Casting Small Diameter Stainless Steel Spline Shaft     manufacturer China Custom Casting Small Diameter Stainless Steel Spline Shaft     manufacturer
editor by czh 2023-01-21